HP LASERJET RESOURCES




HP LaserJet M630 Part Numbers

Enterprise Flow MFP M630h (P7Z47A); Managed Flw MFP M630zm (B3G84A, B3G85A, B3G86A, J7X28A);
Managed MFP M630hm (L3U61A); Managed Flow MFP M630hm (P7Z48A)

Part #Description
RU7-0294   15-tooth gear   
RU5-0083   16-tooth gear   
RU7-0293   17-tooth gear   
B3G84-67910 1GB memory DIMM Kit   
B3M73-67902 1x500 sheet paper feeder assembly   
RM2-8002   1x500 sheet paper feeder with cabinet controller PC board assembly   
RM2-5106   1x500-sheet paper feeder front upper cover assembly   
RM2-0341   1x500-sheet paper feeder paper pickup assembly   
RM2-5104   1x500-sheet paper feeder right door assembly   
RM2-5105   1x500-sheet paper feeder stock door assembly   
B3M74-67902 1x500-sheet paper feeder with stand/cabinet   
RM2-8007   2,500 sheet high-capacity paper feeder controller PC board assembly   
B3M75-67902 2,500-sheet high capacity input paper feeder assembly   
RM2-5101   2,500-sheet high-capacity paper feeder right door assembly   
RU7-0295   23/19-tooth gear   
B3G84-67909  2GB memory DIMM kit   
B3G85-67903 320GB encrypted hard disk drive assembly   
RU7-0292   33-tooth gear   
RU7-0303   35-tooth gear   
B3G85-67904 500GB hard disk drive assembly (U.S. government only)   
VS1-7500   6-pin connector   
B3M76-67902 900-sheet 3-bin stapling mailbox   
RU7-0290   91/25-tooth gear   
CC355-40013 ADF roller bogie cover   
L2725-60002 ADF roller replacement kit   
5851-4879 ADF separation pad spring   
B3G86-67901 ADF Whole Unit Kit   
RC1-2833 Arm cover - Located on upper front inside of the printer   
RM1-5894   Bin sensor PCA - For the Stapler stacker multi-bin mailbox   
RM1-5896   BIN SOLENOID ASSY   
RL1-2438   Bottom cover - For the multi-bin mailbox (MBM)   
RC1-3090 Bushing stop - For the fuser lever - Located on the inside upper front part of the printer - Two used   
RM1-8323   Cartridge sensor (PS115) assembly   
RM2-7477   Cartridge sensor cable assembly   
RM1-5932   Cassette left rail assembly   
RM1-5931   Cassette right rail assembly   
5042-9118  Control panel access cover   
B3G84-67912 Control Panel Assy Kit (Replaced: B3G84-67908)
5851-6021 Control panel overlay - Snaps on top of the control panel assembly (France, Danish, Swedish, and UK)   
5851-6019 Control panel overlay - Snaps on top of the control panel assembly (France,Italy,Russia,Spain, and UK)   
5851-6024 Control panel overlay - Snaps on top of the control panel assembly (Japan and Korea)   
5851-6023 Control panel overlay - Snaps on top of the control panel assembly (Spain-Portugal)   
5851-6020 Control panel overlay - Snaps on top of the control panel assembly (US)   
5851-0660 Control panel thumbscrew   
RM2-8134   Controller PC board assembly - For the envelope feeder   
RK2-3244   Cooling Fan (FM2) - Provides air to the cartridge area for cooling   
RK2-1988   Cooling fan (FN101) - Fan that cools the cartridge and power supply area   
RK2-1992   Cooling fan (FN102) - Exhausts heat from toner cartridges   
RK2-1989   Cooling fan (FN102) - Fan that cools the cartridge area   
RK2-0280   Cooling fan (FN105) - Located on right side of printer - Provides air to the print cartridge area   
RM2-7479   DC controller cable assembly   
RM2-7481   DC controller cable assembly   
RM2-7458   DC Controller PCB Assy (REPLACED RM2-7458)
RC1-2892 Delivery roller option 1   
RC1-2893 Delivery roller option 2   
5851-6084 Document feeder foam reflector - For the X585 models   
B4A39-60008 Document feeder hinge assembly   
B3G86-67903 Document feeder mylar strip   
RC2-7967   Door arm B   
RC2-8086   Door release rod   
RM2-7476   Door sensor (SW106) cable assembly   
RM1-1045   Door sensor assembly - 500-sheet feeder assembly access door open sensor (SW501) switch assembly   
RM2-7478   Door switch (SW101) cable assembly   
RM2-5918   Drum drive assembly   
RM1-8358   Drum motor (M102) assembly - Drives the photosensitive drum, primary charging roller, and transfer roller   
WG8-5849   Duplex re-pick sensor - Detects the leading edge of the page (Replaced WG8-5624)
B3G84-67903 Duplexer Assembly - Automatic two sided printing accessory   
5851-5022 E-Duplex selector assembly - For the X585 flow models only   
RM1-6663   Entrance solenoid (SL2) assembly - For the stapler stacker multi-bin mailbox (MBM)   
B3G87-67902 Envelope feeder assembly   
RM1-5085   Envelope feeder cable - Connects envelope feeder to DC controller board   
RM1-5222   Envelope feeder joint shaft assembly   
RM2-6171   Envelope feeder paper side end guide assembly   
RC4-6107   Envelope feeder right width limit guide   
RM1-5224   Envelope feeder separation roller assembly   
RM2-6170   Envelope feeder weight assembly   
RL1-2831   Environment cover   
RM2-7473   Environment sensor cable assembly   
RM1-7420   Environmental temperature sensor (TH3) assembly   
B3G84-67911 Fax card replacement kit   
A2W77-67910 Fax card replacement kit - For the Color Laserjet M880   
RM2-7470   Feed motor cable assembly   
RM1-5157   Flapper assembly - For the stapler stacker multi-bin mailbox   
B3G85-67901  Formatter (main logic) PC board assembly   
RC4-1530   Front block upper guide support   
B3G85-67905  Front cover assembly - Plastic cover that protects the front side of the printer   
RM2-5814   Front top cover assembly - Plastic cover that protects the top front part of the printer   
RM2-7480   Full sensor cable assembly   
B3G84-67904 Fuser entrance guide assembly   
RM1-5051   Fuser motor (M299) assembly - Drives the pressure roller and fuser delivery roller - Pressurizes or releases the pressure roller   
RM1-7159   Fuser motor cable   
B3M77-67903   Fusing assembly - For 110 VAC operation - Bonds toner to the paper with heat   
RC2-5688   Grounding plate - Located on envelope feeder section   
RM1-5461   Grounding plate assembly - Located next to the transfer roller   
RC1-2822 Handle link - Mechanical link between upper plate handle and release latch   
5851-5361 Hardware Integration Pocket (HIP) cover   
RM2-5826   High-voltage power supply - For 110 VAC   
CC497-67902 HP postcard media input tray   
B3G86-67905 Image scanner whole unit replacement kit   
RM2-5791   Interconnect PC board (ICB) assembly   
RM1-7431   Interlock assembly - For the stapler stacker multi-bin mailbox (MBM)   
RM1-6335   Interlock lever assembly - For the stapler stacker multi-bin mailbox (MBM)   
RM2-7491   IS power cable assembly   
J8029-61001  Jetdirect 2800w NFC wireless D assembly   
5851-6430 Keyboard kit - For use with the Laserjet M630z   
5851-6431 Keyboard kit - For use with the LaserJet M630z (UK English)   
RM2-7482   Laser scanner cable assembly   
RM1-8406   Laser/scanner assembly   
RC4-1515   Left front cover assembly - Plastic cover that protects the left front side of the printer   
RC2-8029   Legal size guide   
RM1-5156   Lift tray assembly - For the stapler stacker multi-bin mailbox   
RM1-5914   Lifter assembly - One required for each cassette   
RM1-5913   Lifter base assembly   
RM2-0346   Lifter drive assembly   
RM1-6330   Lifter guide assembly - For the multi-bin mailbox (MBM)   
RM1-7162   Lifter motor cable   
RM2-5792   Low-voltage power supply - For 110 VAC   
RC1-2902 Lower access door link rod   
RC2-2633   M 4x5 screw   
B3M77-67902 Maintenance kit - Includes fusing assembly for 110 VAC, transfer roller, and tray 2–5 pickup and feed rollers   
RM2-5917   Mounting plate assembly - Where switch (SW104) mounts on   
RM2-5816   Multi-purpose/tray 1 cover assembly - Drop down door that provides access for tray 1   
RM2-5822   Multi-purpose/tray 1 paper pick-up assembly   
RM2-7484   Option sensor cable assembly   
RM1-7374   Output accessory detection switch (SW104) - For the multi-bin mailbox (MBM)   
B3G84-69702  Output bin assembly   
RM1-4548   Paper feed guide assembly   
RM1-5173   Paper feed guide assembly - For the stapler stacker multi-bin mailbox (MBM)   
RM1-8285   Paper feed motor (M101) assembly - Drives the tray 1 and tray 2 pick-up roller, and feed rollers (Replaced: RM2-5942)
RC2-5701   Paper feed roller - For the envelope feeder   
RM1-8411   Paper feed roller assembly   
RM1-6332   Paper feed roller assembly - For the stapler stacker multi-bin mailbox (MBM)   
RM1-5223   Paper feed roller assembly - Located on the envelope feeder assembly   
RM1-5919   Paper pick-up assembly - For the 1x500-sheet paper cassette feeder   
RM2-5804   Paper pick-up drive assembly   
RM1-5941   Paper pick-up drive assembly - For the 1x500 sheet feeder assembly   
RM1-5942   Paper pick-up drive assembly - For the 3x500 sheet feeder assembly   
RC2-5700   Paper pick-up roller - For the envelope feeder   
RM1-5221   Paper pick-up roller assembly - Located on the envelope feeder   
RM1-7170   Paper sensor solenoid cable   
RM1-5159   Plapper assemby - For the stapler stacker multi-bin mailbox (MBM)   
RM2-5818   Power switch assembly   
RC4-1531   Rear block upper guide support   
RC1-2886 Rear gas edge spring guard   
RC4-1537   Rear IS lock cover   
RM1-8413   Registration roller assembly   
RM2-7486   Reverse fan cable assembly   
RM2-5810   Reverse guide assembly   
RM2-7487   Reverse joint cable assembly   
RM2-5799   Reverse roller assembly   
RC1-2852 Reverse side rear cover   
RC4-1527   Right IS cover   
RU5-4142   Right lower access door shaft   
RM2-5820   Right lower cover assembly - Plastic cover that protects the lower right side of the printer   
B3G84-60108 Scanner control board (SCB) left cable   
B3G84-60107 Scanner control board (SCB) right cable   
B3G84-60109 Scanner control board (SCB) wire harness 20-pin cable   
B3G86-67904 Scanner control PC board assembly   
RM2-7471   Scanner joint cable assembly   
RM2-7474   Side band cable assembly   
RM1-7179   Size detect cable   
RU5-2265   Small compression grounding spring - Located on the upper rear side of printer chassis   
B3G84-67907 Solid State Memory (SSM) kit with instruction guide   
RM1-6664   Stamp assembly solenoid - For the stapler stacker multi-bin mailbox   
C8085-60541 Staple cartridge - Contains 5000 staples - For the add-on staple/stacker unit   
RM1-5166   Stapler assembly - For the stapler stacker multi-bin mailbox   
RM2-5242   Stapling mailbox bin assembly   
RM2-5278   Stapling mailbox driver PC board assembly   
RM2-5275   Stapling mailbox front cover assembly   
RM2-5277   Stapling mailbox handle assembly   
RM2-5235   Stapling mailbox jog assembly   
RM2-5240   Stapling mailbox output bin tray assembly   
RK2-2162   Stepping motor (M1800) - Located on the envelope feeder area - For 24 VAC   
RU6-2475   Tension spring - Provides tension to the lifter assembly   
RC1-3293 Torque limiter - Located next to paper feeder roller in optional 500 sheet tray assembly   
RC2-8085   Torsion spring   
RC3-1470   Torsion spring - Located on the multi-purpose/tray 1 assembly   
B3G84-67901 Transfer roller service kit assembly   
B3G84-67906 Tray 1 pick-up roller assembly - Part of tray 1 roller kit   
B3G84-67905 Tray 2 pick-up roller assembly - Part of tray 2–5 roller kit   
RM2-0350   TRAY SIZE SWITCH ASSY
RC2-5576   Tray stopper - For the stapler stacker multi-bin mailbox   
F5S62-61001 Trusted Platform Module (TPM) service kit - Automatically encrypts all data that passes through the product   
RC4-1529   Upper cartridge guide   
5851-5360 USB plastic cover   
J8026-61001 USB wireless print server kit   


HP Printer Parts

LPT is a printer parts vendor. Reach us at (608) 268-7600.

Learn more »

Quality Rebuilt Fusers

Every LPT remanufactured fuser is tested and inspected.

Learn more »

Printer Tech Support

Every LPT Tech Support provider has worked in printer service since the early 1990s.

Learn more »