HP DesignJet 820mfp Part Numbers
Models: Designjet 820mfp (Q6685A).
| Part # | Description |
|---|
| C7770-60303 |
Back platen asm |
| C4705-60082 |
Belt, Carriage belt (D-size) |
| C7769-60409 |
Bracket Kit |
| C7769-60169 |
Bushing, Cutter |
| C7769-60305 |
Cable Kit, Carriage asm trailing cable kit - Includes installation instructions, trailing cables, two mounting clips, and a ferrite - Cables are 1.4m (4.7ft) long with 30 pin (M) edge connectors - For use with 24-inch plotters |
| C4713-60182 |
Cable, Bail link |
| C4713-60181 |
Cable, Carriage asm trailing |
| C3190-40020 |
Cam, Bail lift |
| C4704-40070 |
Capping Strips, E-size |
| C7769-60182 |
Carriage belt |
| C7770-60014 |
Carriage Belt |
| C4706-60082 |
Carriage Belt, E-size |
| C4844A |
Cartridge, HP 10 High Capacity Black Ink - 69ml |
| C4912A |
Cartridge, HP 82 High Capacity Magenta Ink - 69ml, prints approximately 1400 pages at 5% printing density (USA) |
| C4913A |
Cartridge, HP 82 High Capacity Yellow Ink - 69ml, prints approximately 1400 pages at 5% printing density (USA) - |
| C4911A |
Cartridge, No. 82 standard capacity Cyan ink (69ml ink) |
| C4713-60129 |
Clutch, Overdrive |
| C7769-60382 |
Control Panel |
| C7779-60159 |
Cover, Right Side |
| C4713-60040 |
Cutter asm |
| C7769-60390 |
Cutter asm |
| C7779-69263 |
Electronics module - Contains main logic board, connectors for plug-in cards, connector for parallel interface cable, connector for USB cable, and cooling fan |
| C7769-60183 |
Encoder strip |
| C7770-60013 |
Encoder strip |
| C7769-60407 |
Fan |
| C7769-69441 |
Formatter |
| C4713-60091 |
Front Panel |
| C7769-60408 |
Gear asm, Paper drive transmission gear kit - Includes two gears used to drive the paper drive roller |
| C7769-60405 |
Hardware Kit |
| C7770-60286 |
Ink Tubes asm |
| C7769-60385 |
Interconnect PC board |
| C6074-60460 |
Lubricant, Grease - For helical gear (Drive roller gear) |
| C7769-60394 |
Maintenance kit - Contains lubricant, gloves, cotton wipe, spring tensioner, foams, tubes, belt, encoder strip, setup pens, trailing cable, service station, cutter, and carriage - For use with the 24-inch DesignJet 500/800 plotters |
| C7770-60287 |
Maintenance kit - Includes idler pulley, spring tensioner, carriage base, service station, cutter asm, setup pen asm, belt, encoder strip and RIDs asm |
| CH337-67003 |
Media Bin |
| CH337-67003 |
Media Bin |
| C7769-60283 |
Media deflector kit - Kit includes three deflectors - Installed in front of pinch-wheels |
| C7769-60379 |
Media sensor |
| C7779-60270 |
Memory, 128MB - Can be installed ONLY into the formatter board |
| C4713-69203 |
Module, Electronics |
| C4713-60092 |
Motor, Carriage |
| C7769-60375 |
Motor, Carriage |
| C7769-60377 |
Motor, Paper axis |
| C4713-60171 |
Overlay, Front |
| CQ654-67008 |
Panel PCB board |
| C4700-60042 |
Paper Drive Platen Roller Asm |
| C7770-60289 |
Paper drive roller kit - Includes roller asm, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (Axial) spring, lint free cloth, rubber glove, and instruction sheets |
| C7769-60175 |
Pincharm asm |
| C7769-60181 |
Pincharm lift mechanism |
| C7770-60015 |
Pincharm lift mechanism |
| C7769-60378 |
Pincharm sensor |
| C7769-60410 |
Platen asm, Back platen asm - Curved cover/guide that is installed below the paper drive roller - For use with 24-inch plotters |
| C7769-60387 |
Power Supply |
| C7769-69376 |
Printhead carriage asm |
| C7769-60164 |
Printhead setup kit - Used to prime the ink tubes - Includes 4 setup printheads |
| C7769-60298 |
Ribbon cable kit |
| C7770-60267 |
Ribbon cable kit |
| C7769-60412 |
Roller, Paper drive roller kit - Includes roller asm, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring, lint free cloth, rubber glove, and instruction sheets - For use with 24-inch plotters |
| C7769-60380 |
Rollfeed mount kit |
| C7769-60384 |
Sensor, Drive roller |
| C3190-60142 |
Service Station |
| C7769-60374 |
Service Station |
| C7769-60391 |
Service station bracket |
| C7769-60242 |
Spindle Rod, 24-inch |
| C7769-60243 |
Spindle Rod, 42-inch |
| C7769-60165 |
Spittoon asm, Left |
| C3190-80013 |
Spring, Bail |
| 07575-80012 |
Spring, Bail gear support 'claw' spring |
| C4713-60035 |
Starwheel Mount Asm |
| C4713-60098 |
Strip, Encoder |
| C7769-90066 |
Support DVD |
| 6040-0855 |
Synthetic Oil |
| C7769-60176 |
Tensioner kit, Belt |
| C7770-60274 |
Trailing Cable |