HP DesignJet 510 Part Numbers
Models: Designjet 510 (CH336A, CH337A, CJ996A, CJ997A).
| Part # | Description |
|---|
| C7769-60410 |
Back platen asm |
| C7769-60176 |
Belt tensioner kit |
| C7769-60409 |
Bracket kit - Includes the left cutter guide bracket and left encoder holder |
| C7769-60305 |
Cable Kit, Carriage asm trailing cable kit - Includes installation instructions, trailing cables, two mounting clips, and a ferrite - Cables are 1.4m (4.7ft) long with 30 pin (M) edge connectors - For use with 24-inch plotters |
| C7769-60182 |
Carriage belt |
| C4912A |
Cartridge, HP 82 High Capacity Magenta Ink - 69ml, prints approximately 1400 pages at 5% printing density (USA) |
| C4913A |
Cartridge, HP 82 High Capacity Yellow Ink - 69ml, prints approximately 1400 pages at 5% printing density (USA) |
| C4911A |
Cartridge, No. 82 standard capacity Cyan ink (69ml ink) |
| C7769-60390 |
Cutter Asm |
| C7769-60169 |
Cutter bushing |
| C7769-60384 |
Drive roller encoder sensor |
| CH336-67002 |
Electronics module |
| C7769-60254 |
Encoder disk asm |
| C7769-60183 |
Encoder strip |
| C7770-60013 |
Encoder strip |
| C7769-60407 |
Fav |
| CH336-67001 |
Formatter |
| C7769-60405 |
Hardware Kit |
| CH336-67010 |
Ink Supply Station |
| C7769-60385 |
Interconnect PC board |
| C7769-60165 |
Left spittoon asm |
| C7769-60394 |
Maintenance kit - Contains lubricant, gloves, cotton wipe, spring tensioner, foams, tubes, belt, encoder strip, setup pens, trailing cable, service station, cutter, and carriage |
| C7769-60289 |
Media deflector holder |
| C7769-60379 |
Media sensor |
| C7769-60375 |
Motor, Carriage (scan-axis) |
| C7769-60412 |
Paper drive roller kit - Includes roller asm, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring, lint free cloth, rubber glove, and instruction sheets - For use with 24-inch plotters |
| C7769-60408 |
Paper drive transmission gear kit - Includes two gears used to drive the paper drive roller |
| C7769-60175 |
Pincharm asm with wheels |
| C7769-60181 |
Pincharm lift mechanism |
| C7769-60378 |
Pincharm sensor |
| C7769-60164 |
Printhead setup kit - Used to prime the ink tubes - Includes 4 setup printheads |
| C7769-60298 |
Ribbon cable kit |
| C7769-60374 |
Service Station |
| C7769-60391 |
Service station bracket |