| Part # | Description |
|---|---|
| RG1-4213 | Cable, Top Cover cable - From top cover microswitch (SW101) to DC Controller board |
| RG1-4221 | Cable, Tray 2 pickup sensor cable - Connects to sensors PS101 and PS107 |
| RM1-1195 | Control panel |
| RC1-3356 | Control panel overlay - English |
| RK2-0278 | Cooling fan on left side of printer - FN101 |
| RC1-3280 | Cover, Duplexer |
| RC1-0288 | Cover, Formatter board cover |
| RC1-0019 | Cover, Inner right front cover |
| RM1-1077 | Cover, Left |
| RC1-3282 | Cover, Lower rear |
| RM1-1076 | Cover, Right |
| RM1-1081 | Cover, Top |
| RC1-0289 | Cover, Top rear |
| RM1-1108 | DC Controller |
| RM1-0026 | Delivery Asm |
| RC1-7890 | Detent stop for 500 sheet feeder |
| Q2439B | Duplexer |
| Q2438B | Envelope feeder |
| RK2-0280 | Fan, right side of printer - Print cartridge fan - FN103 |
| RM1-0012 | Feed Roller Asm, Feed roller assembly; also 5851-4076 |
| RM1-0037 | Feed/Sep Roller, Cassette |
| Q2444B | Feeder, 1,500-sheet |
| Q2440B | Feeder, Optional 500-sheet |
| RC1-0060 | Flag, feed sensor flag for Tray 1 |
| RC1-0209 | Flag, Paper sensor flag for Tray 2 pickup assembly |
| RC1-0208 | Flag, Paper sensor flag holder |
| Q3652-67901 | Formatter, refurbished, 4250N, 4350N, 4240N |
| Q3653-67904 | Formatter, refurbished, non-network |
| RM1-1082 | Fuser |
| RU5-0040 | Gear - 23 tooth gear |
| RM1-0002 | Gear Asm, Duplexing pendulum assembly - Gear assembly that transfers power from main motor to run duplexing capability |
| RU5-0045 | Gear, 18-tooth gear, right side of printer in the Tray 2 pickup assembly |
| RC1-0273 | Guide, feed belt guide for left side |
| RL1-0015 | Kicker assembly |
| RM1-1067 | Laser Scanner |
| RM1-1094 | Lifter Drive, 500-sheet feeder |
| RM1-1074 | Lifter Drive, Tray 2 |
| RM1-1066 | Main Drive Asm |
| Q5421A | Maintenance Kit |
| Q7715-67951 | Memory (DIMM), 64MB, 100-pin, DDR |
| Q7717-67951 | Memory (DIMM), HP 96MB 100-pin DDR |
| Q7725-68003 | Memory, Flash memory - 32MB Flash - Version 08.013.4 |
| RK2-0273 | Motor |
| RC1-0211 | Pickup Arm |
| RC1-0212 | Pickup Arm Holder |
| RM1-1097 | Pickup Asm, Tray 1 |
| RM1-0034 | Pickup drive asm, Tray 2 |
| RM1-1133 | Pickup Roller Drive Asm, 1,500-sheet feeder |
| RM1-0036 | Pickup Roller, Cassette |
| RL1-0019 | Pickup Roller, Tray 1 |
| RM1-1070 | Power Supply |
| RM1-0027 | Rear Output Tray |
| RM1-1098 | Registration asm |
| RC1-0136 | Roller Bushing |
| RM1-0041 | Sensing Asm, Tray 2 paper size tray sensing assembly - White plastic tray size sensing fingers and microswitch assembly |
| WG8-5624 | Sensor, Photo-sensor (TLP1241) - Sensor flag activated - |
| RL1-0007 | Sep Pad, Tray 1 |
| RK2-0276 | Solenoid - Engages Tray 1 pickup roller |
| RK2-0269 | Solenoid, pickup |
| RC1-0213 | Spring, Compression spring, pickup and feed rollers in Tray 2 pickup assembly |
| RC1-0198 | Spring, Tension spring -lifter drive assembly |
| RC1-0061 | Spring, Torsion spring; new: 5851-4076 |
| Q2442B | Stacker, 500-sheet |
| Q3216-60500 | Staple Cartridge Asm |
| Q2443B | Stapler/Stacker |
| RM1-0043 | Swing Plate Asm |
| 5851-2766 | Swing Plate Kit |
| RL1-0013 | Swing Plate, Tray 2 |
| RM1-1080 | Toner Access Door |
| Q5942X | Toner Cartridge |
| RC1-0335 | Torque limiter - for 500 sheet feeder pickup roller |
| RM1-1110 | Transfer Roller |
| RM1-0050 | Tray 1 |
| RM1-1088 | Tray, 500-sheet |
| RM1-0005 | Tray, Drop down |
Every LPT Tech Support provider has worked in printer service since the early 1990s.
Learn more »